Features & Benefits
Easy commissioning and balancing
Provides automatically adopted settings of maximum flows for heating and cooling mode together with TA-Modulator and TA-Slider 160 CO, TA-Slider 160 KNX R24 or TA-Slider 160 BACnet/Modbus CO.
Precise flow control
Provides uniquely shaped EQM characteristic for best modulating control together with TA-Modulator.
Easy troubleshooting
Provides flow and differential pressure measuring for system diagnostic and pump optimization together with TA-Modulator.
Compact installation
Saves space by using one terminal unit for heating and cooling.
Technical Information
Application:
Heating and cooling systems.
(Change-over system)
Functions:
Control
Dimensions:
DN 15-20
Pressure class:
PN 16
Max. differential pressure (ΔpV):
200 kPa
Temperature:
Max. working temperature: 120°C
Min. working temperature: -10°C
Media:
Water or neutral fluids, water-glycol mixtures (0-57%).
Leakage rate:
Level A (EN 12266-1/12 - P12)
Characteristics:
Linear, best suited for on/off control.
Material:
Valve body: Brass CW602N CuZn36Pb2As (322203-13001: Brass CW617N CuZn40Pb2)
Balls: Brass CW614N CuZn39Pb3
Spindles: Brass CW614N CuZn39Pb3
Seats: PTFE
O-rings: EPDM (Perox)
Surface treatment:
Valve body: Nickel-plated or non-plated (raw finish).
Spindles and balls: Nickel-plated.
Marking:
IMI TA, PN, DN.
Connection:
External thread according to ISO 228.
- Eurocone
- Flat faced ends
Internal thread according to ISO 228.
Connection to actuator:
F03 and F04 according to EN ISO 5211.
Angle of rotation:
90°
Actuators:
TA-M106, TA-M106 CO, TA-MC106Y
Functions:
Proportional control
3-point control
Manual override
Supply voltage:
TA-M106/24: 24 VAC +6% -10%
TA-M106/230: 230 VAC +6% -10%
TA-M106 CO: 24 VAC +6% -10%
TA-MC106Y: 24 VAC ±10%
Frequency:
50/60 Hz ±5%.
Power consumption:
TA-M106, TA-M106 CO: 3.5 VA
TA-MC106Y: 3.0 VA
Input signal:
TA-M106, TA-M106 CO: 3-point
TA-MC106Y: 0(2)-10 VDC, Ri 77 kΩ. (0-10, 10-0, 2-10, 10-2)
Output signal:
TA-MC106Y: 0-10 VDC (0-10, 10-0), max. 8 mA, min. 1.2 kΩ.
Actuating time:
(at 50 Hz/90°)
TA-M106, TA-M106 CO: 130 s
TA-MC106Y: 80 s
Adjusting torque:
8 Nm
Temperature:
Medium temperature: max. 80°C
Operating environment: 0°C - +50°C
Ingress protection:
IP43
Protection class:
EN 60730
24 VAC: III
230 VAC: II
End position switch-off:
Fixed at 90°
Cable:
1,5 m, three wire (0,5 mm2) with wire end ferrule.
CO version: With connector to actuator TA-Slider 160 CO or TA-Slider 160 BACnet/Modbus CO instead of wire end ferrules.
Colour:
Orange RAL 2011, grey RAL 7043.
Marking:
Label: IMI TA, CE, product name and technical specification.
Connection to valve:
F04 according to EN ISO 5211.
Angle of rotation:
90°
Articles
TA-M106/TA-M106 CO/TA-MC106Y actuators
Supply voltage | Input signal | Kg | EAN | Article No | |
TA-M106 | 24 VAC | 3-point | 0,5 | 5902276884016 | 322204-29000 |
TA-M106 | 230 VAC | 3-point | 0,5 | 5902276884023 | 322204-29001 |
TA-M106 CO | 24 VAC | 3-point | 0,5 | 5901688829639 | 322042-90000 |
TA-MC106Y | 24 VAC | 0(2)-10 VDC | 0,5 | 5902276884030 | 322204-29002 |
Thread according to ISO 228.
External threads
Thread according to ISO 228.
Nickel-plated
DN | D | L1 | L2 | H | H1 | H2 | h | W | Kvs | Kg | EAN | Article No | |
Flat faced ends | |||||||||||||
15 | G3/4 | 42 | 34 | 117 | 29 | 50 | 9,4 | 35 | 1,25 | 1,0 | 8016603306090 | 322203-13000 |
Non-plated (raw finish)
DN | D | L1 | L2 | H | H1 | H2 | h | W | Kvs | Kg | EAN | Article No | |
Flat faced ends | |||||||||||||
15 | G3/4 | 42 | 34 | 117 | 29 | 50 | 9,4 | 35 | 1,25 | 1,0 | 8016603308186 | 322031-30402 | |
15* | G3/4 | 47 | 39 | 141 | 37 | 60 | 9,4 | 41 | 2,80 | 1,9 | 8016603309466 | 322031-30500 | |
Eurocone | |||||||||||||
15 | G3/4 | 42 | 34 | 117 | 29 | 50 | 9,4 | 35 | 1,25 | 1,0 | 8016603308162 | 322031-30403 | |
15* | G3/4 | 47 | 42,5 | 141 | 37 | 60 | 9,4 | 41 | 2,80 | 1,9 | 8016603309411 | 322031-30501 |
Valve and actuator to be ordered and delivered separately.
*) Body marked with DN 20 (connections DN 15).
Thread according to ISO 228.
Internal threads
Thread according to ISO 228.
Non-plated (raw finish)
DN | D | L1 | L2 | H | H1 | H2 | h | W | Kvs | Kg | EAN | Article No |
20 | G3/4 | 47,5 | 47,5 | 141 | 37 | 60 | 9,4 | 40 | 4,00 | 2,0 | 8016603310219 | 322031-30504 |
Valve and actuator to be ordered and delivered separately.
For connection with press coupling. Swivelling nut.
Connection with smooth end
For connection with press coupling.
Swivelling nut.
Valve DN | D | Pipe Ø | L* | EAN | Article No |
15 | G3/4 | 15 | 39 | 7318793810601 | 52 009-315 |
Swivelling nut.
Soldering connection
Swivelling nut.
Valve DN | D | Pipe Ø | L* | EAN | Article No |
15 | G3/4 | 15 | 13 | 7318792749308 | 52 009-515 |
15 | G3/4 | 16 | 13 | 7318792749407 | 52 009-516 |
Swivelling nut.
Welding connection
Swivelling nut.
Valve DN | D | Pipe DN | L* | EAN | Article No |
15 | G3/4 | 15 | 36 | 7318792748509 | 52 009-015 |
Compression connection
Support bushes shall be used, for more information see catalogue leaflet FPL.
Should not be used with PEX pipes.
Chrome plated
Valve DN | D | Pipe Ø | L** | EAN | Article No |
15 | G3/4 | 15 | 27 | 7318793705006 | 53 319-615 |
15 | G3/4 | 18 | 27 | 7318793705105 | 53 319-618 |
15 | G3/4 | 22 | 27 | 7318793705204 | 53 319-622 |
*) Fitting length (from the gasket surface to the end of the connection).
**) Over all length L refers to unassembled coupling.
Threads according to ISO 7-1. Swivelling nut.
With External thread
Threads according to ISO 7-1.
Swivelling nut.
Valve DN | D | D1 | L* | EAN | Article No |
15 | G3/4 | R1/2 | 29 | 4024052516612 | 0601-02.350 |
Threads according to ISO 228.
With internal thread
Threads according to ISO 228.
Thread length according to ISO 7-1.
Swivelling nut.
Valve DN | D | D1 | L* | EAN | Article No |
15 | G3/4 | G1/2 | 21 | 7318794016903 | 52 163-015 |
For euroconeNickel plated, soft sealing (EPDM), max. 95°C.
Compression fitting for copper or steel pipes
For eurocone
Nickel plated, soft sealing (EPDM), max. 95°C.
Ø Pipe | EAN | Article No |
15 | 4024052515851 | 1313-15.351 |
18 | 4024052516056 | 1313-18.351 |
for copper or precision steel pipe with a 1 mm wall thickness. Brass.
Support sleeve
for copper or precision steel pipe with a 1 mm wall thickness.
Brass.
Ø Pipe | L | EAN | Article No |
12 | 25,0 | 4024052127016 | 1300-12.170 |
15 | 26,0 | 4024052127917 | 1300-15.170 |
16 | 26,3 | 4024052128419 | 1300-16.170 |
18 | 26,8 | 4024052128815 | 1300-18.170 |
For eurocone
Compression fitting for multi-layer pipes
For eurocone
Ø Pipe | EAN | Article No |
16x2 | 4024052137312 | 1331-16.351 |
For euroconeMetal-to-metal sealing
Compression fitting for copper or steel pipes
For eurocone
Metal-to-metal sealing
Support bushes shall be used.
Ø Pipe | EAN | Article No |
12 | 4024052214211 | 3831-12.351 |
14 | 4024052214310 | 3831-14.351 |
15 | 4024052214617 | 3831-15.351 |
16 | 4024052214914 | 3831-16.351 |
18 | 4024052215218 | 3831-18.351 |
For eurocone
Compression fitting for plastic pipes
For eurocone
Ø Pipe | EAN | Article No |
12x1,1 | 4024052136018 | 1315-12.351 |
14x2 | 4024052134618 | 1311-14.351 |
16x1,5 | 4024052136117 | 1315-16.351 |
16x2 | 4024052134816 | 1311-16.351 |
17x2 | 4024052134915 | 1311-17.351 |
18x2 | 4024052135110 | 1311-18.351 |
20x2 | 4024052135318 | 1311-20.351 |
For heating and cooling.Max. temperature: 90°C.Shell thickness: 16 mm.Material: Cross-linked polyethylene foam, density external layer 80 kg/m3, internal layer 29 kg/m3.Fire class: B2 – DIN 4102 and 1 – UNI 9177.
Insulation
For heating and cooling.
Max. temperature: 90°C.
Shell thickness: 16 mm.
Material: Cross-linked polyethylene foam, density external layer 80 kg/m3, internal layer 29 kg/m3.
Fire class: B2 – DIN 4102 and 1 – UNI 9177.
Valve DN | L | H | W | EAN | Article No |
15 | 125 | 125 | 90 | 5902276805714 | 322031-30405 |
15* / 20 | 120 | 140 | 100 | 5902276805721 | 322031-30508 |
*) Body marked with DN 20 (connections DN 15).
For easier mounting on walls or ceilings.2 pcs of M4 screws for fixing the valve to the bracket are included in the package.
Bracket
For easier mounting on walls or ceilings.
2 pcs of M4 screws for fixing the valve to the bracket are included in the package.
L | H | W | EAN | Article No |
80 | 100 | 80 | 8016603308032 | 322031-30000 |