The danger below the surface
Managing the water quality inside your HVAC system by removing air and dirt is an effective way to extend the lifetime of critical system elements while optimizing system performance.
The benefits of good water/quality management include:
Reduce energy consumption
Prolonged system service life
Quiet operation
No downtime
Dirt deposit
Dirt deposits will travel and accumulate in pipes, pumps, radiators and boilers, causing obstructions, premature failures and reduced overall system efficiency.
Micro and macro bubbles
Accumulated gases in airlocks and micro and macro bubbles, together with invisible gases dissolved in the water, all threaten the efficient operation of the heating and cooling system and its lifespan.
Performance
Air locks and bubbles impair water flow and, as a result, heat transfer capacity, which reduces the system’s heating power performance and increases running costs.
Dirt in systems comes in many forms, both prior and after commissioning:
Causes prior to commissioning:
Existing dirt in pipes and components
Burr remains (particularly from plastic piping)
Welding and PTFE residues
Lubricants and sealants
Sand and dust
Residues from additives and inhibitiors
Foreign items
Causes after commissioning:
Corrosion and rust
![Dirt in system](/sites/default/files/2024-07/IMI_Zeparo_Section01_Dirty_550x650.jpg)
Our Solutions
Air in systems comes in many forms each requiring its own solution:
During the water make up process, gases in the water, which are lighter, are transported through the system and are later released to the surface. Once commissioned, if the overall system pressure is too low, air will be drawn from the outside on a continuous basis.
Removing dissolved gasses is essential for HVAC system health
Gas can cause various problems in heating and cooling systems:
- Corrosion
- Deposits from corroded products
- Noise
- Circulation problems
- Reduction in heating performance
Our solutions
![Zeparo Aero](/sites/default/files/2024-07/zeparo.jpg)
Zeparo Aero
Zeparo Aero is the microbubble separator for addressing micro and macro bubbles in the flow by capturing, gathering and discharging them.
![vento connect](/sites/default/files/2024-07/vento%20conect.jpg)
Vento Connect
Vento Connect by IMI Pneumatex is the solution for at least 50% more efficient degassing thanks to the Vacuum degassing technology.
The wide range of products provides a solution for almost any building type from large to small. Watch the movie to find out more about the range and the applications
Book an appointment with one of our experts
Do you want to know more?
Discover the New Air & Dirt Handbook
Unveiling the World of Pressurisation and Water Quality
|